Needle roller bearing used in lower suspension linkage for rear shock absorber. 7 bearings required per bike

See SUA81068 for bearing oil seal

 2 in stock

AP8110066

Swingarm bearing oil seal

Dust seal for swingarm bearing

 More than 5 in stock

 90403040 GU90403040 90 40 30 40
 9040 3040 9040.3040 90.40.30.40

Washer / shim, protects head bearing

2 required

 This part is available by special order, request a quote

AP8123641

Fork seal for Marzocchi M1R forks

 More than 5 in stock

30530502-z 30530502 GU30530502 30 53 05 02
 3053 0502 3053.0502 30.53.05.02

Also fits Laverda SFC1000

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Fork dust cover for Marzocchi M1R fork stanchion

Also used on Ducati Paso 750 (1982-1992), 906 Paso and 907 IE

 This part is available by special order, request a quote

 30524500 GU30524500 30 52 45 00
 3052 4500 3052.4500 30.52.45.00

Taper needle roller bearing used as steering head bearing

2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake

 More than 5 in stock

 92249225 GU92249225 92 24 92 25
 9224 9225 9224.9225 92.24.92.25

Steering Head Bearing Spacer for base of steering stem

 This part is available by special order, request a quote

 14516700 GU14516700 14 51 67 00
 1451 6700 1451.6700 14.51.67.00